Linux version 3.10.0 (landley@driftwood) (gcc version 4.2.1) #1 Tue Jul 2 20:52:15 CDT 2013 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000007ffdfff] usable BIOS-e820: [mem 0x0000000007ffe000-0x0000000007ffffff] reserved BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved Notice: NX (Execute Disable) protection missing in CPU! SMBIOS 2.4 present. e820: last_pfn = 0x7ffe max_arch_pfn = 0x100000 PAT not supported by CPU. init_memory_mapping: [mem 0x00000000-0x000fffff] init_memory_mapping: [mem 0x07800000-0x07bfffff] init_memory_mapping: [mem 0x00100000-0x077fffff] init_memory_mapping: [mem 0x07c00000-0x07ffdfff] ACPI: RSDP 000fd9a0 00014 (v00 BOCHS ) ACPI: RSDT 07ffe4b0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) ACPI: FACP 07ffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) ACPI: DSDT 07ffe4f0 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) ACPI: FACS 07ffff40 00040 ACPI: SSDT 07fff800 00735 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) ACPI: APIC 07fff6e0 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) ACPI: HPET 07fff6a0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) 0MB HIGHMEM available. 127MB LOWMEM available. mapped low ram: 0 - 07ffe000 low ram: 0 - 07ffe000 Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x07ffdfff] HighMem empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x07ffdfff] ACPI: PM-Timer IO Port: 0xb008 e820: [mem 0x08000000-0xfffbffff] available for PCI devices Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32412 Kernel command line: root=/dev/hda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttyS0 HOST=i686 PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 126076k/131064k available (2014k kernel code, 4596k reserved, 831k data, 220k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc87fe000 - 0xff7fe000 ( 880 MB) lowmem : 0xc0000000 - 0xc7ffe000 ( 127 MB) .init : 0xc12c8000 - 0xc12ff000 ( 220 kB) .data : 0xc11f7aa4 - 0xc12c79c0 ( 831 kB) .text : 0xc1000000 - 0xc11f7aa4 (2014 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:16 nr_irqs:16 16 Console: colour VGA+ 80x25 console [ttyS0] enabled tsc: Fast TSC calibration failed tsc: Unable to calibrate against PIT tsc: using PMTIMER reference calibration tsc: Detected 997.447 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.89 BogoMIPS (lpj=3989788) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 tlb_flushall_shift: 6 CPU: Intel Pentium III (Katmai) (fam: 06, model: 07, stepping: 03) ACPI: Core revision 20130328 ACPI: All ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0c00) Performance Events: Broken PMU hardware detected, using software events only. Failed to access perfctr msr (MSR c1 is 0) devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type PCI registered PCI: PCI BIOS revision 2.10 entry at 0xfc6c7, last bus=0 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using PIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKS] (IRQs *9) ACPI: Enabled 16 GPEs in block 00 to 0F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized PCI: Using ACPI for IRQ routing Switching to clocksource pit pnp: PnP ACPI init ACPI: bus type PNP registered pnp: PnP ACPI: found 7 devices ACPI: bus type PNP unregistered Switching to clocksource acpi_pm NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds squashfs: version 4.0 (2009/01/31) Phillip Lougher 9p: Installing v9fs 9p2000 file system support msgmni has been set to 246 io scheduler noop registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) piix 0000:00:01.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc040-0xc047 ide1: BM-DMA at 0xc048-0xc04f hda: QEMU HARDDISK, ATA DISK drive hda: MWDMA2 mode selected tsc: Refined TSC clocksource calibration: 997.500 MHz Switching to clocksource tsc hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 hda: max request size: 512KiB hda: 58280 sectors (29 MB) w/256KiB Cache, CHS=57/255/63 hda: cache flushes supported hda: unknown partition table ide-cd driver 5.00 ide-cd: hdc: ATAPI 4X DVD-ROM drive, 512kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice TCP: cubic registered NET: Registered protocol family 17 9pnet: Installing 9P2000 support input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 220k freed mount: mounting /dev/hdc on /mnt failed: No medium found Not using distcc. Type exit when done. (i686:1) /home # e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 997.447 cache size : 2048 KB fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 mmx fxsr sse hypervisor bogomips : 1994.89 clflush size : 32 cache_alignment : 32 address sizes : 36 bits physical, 32 bits virtual power management: (i686:1) /home # exit Restarting system. reboot: machine restart