Mercurial > hg > aboriginal
view sources/targets/armv5l @ 1400:0b1022dc9a36
Remove one more "settings" dependency from functions.sh, and convert lots of architecture configurations from directory to file.
author | Rob Landley <rob@landley.net> |
---|---|
date | Sun, 26 Jun 2011 20:09:37 -0500 |
parents | |
children | b499abdbcdfa |
line wrap: on
line source
DESCRIPTION=" ARM v5, little endian, EABI with vector floating point (vfp). ARMv5 is the Pentium of the ARM world. Most modern arm hardware should be able to run this, and hardware that supports the v5 instruction set should run this about 25% faster than code compiled for v4. " KARCH=arm KERNEL_PATH=arch/${KARCH}/boot/zImage GCC_FLAGS="--with-march=armv5 --with-mfloat-abi=soft --with-mfp=vfp" BINUTILS_FLAGS= QEMU_TEST=$KARCH CROSS_TARGET=armv5l-unknown-linux-gnueabi ROOT=sda CONSOLE=ttyAMA0 # Gentoo from Scratch GFS_CHOST="armv5l-unknown-linux-gnueabi" GFS_ARCH="arm" UCLIBC_CONFIG=" TARGET_arm=y CONFIG_ARM_EABI=y ARCH_WANTS_LITTLE_ENDIAN=y DOPIC=y " LINUX_CONFIG=" # Processor config CONFIG_CPU_ARM926T=y CONFIG_MMU=y CONFIG_VFP=y CONFIG_ARM_THUMB=y CONFIG_AEABI=y # Versatile board CONFIG_ARCH_VERSATILE_PB=y CONFIG_PCI_LEGACY=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_RTC_DRV_PL031=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_MMIO=y " emulator_command() { echo qemu-system-arm -M versatilepb $(qemu_defaults "$@") \ -net nic,model=rtl8139 -net user }