No distccd in $PATH, acceleration disabled. Linux version 2.6.31.5 (landley@securitybreach) (gcc version 4.2.1) #1 Thu Nov 5 21:35:03 CST 2009 Command line: root=/dev/hda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyS0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0xfff0 max_arch_pfn = 0x400000000 init_memory_mapping: 0000000000000000-000000000fff0000 ACPI: RSDP 00000000000fbbf0 00014 (v00 QEMU ) ACPI: RSDT 000000000fff0000 00034 (v01 QEMU QEMURSDT 00000001 QEMU 00000001) ACPI: FACP 000000000fff0038 00074 (v01 QEMU QEMUFACP 00000001 QEMU 00000001) ACPI: DSDT 000000000fff0100 01DDD (v01 BXPC BXDSDT 00000001 INTL 20090123) ACPI: FACS 000000000fff00c0 00040 ACPI: APIC 000000000fff1f18 00072 (v01 QEMU QEMUAPIC 00000001 QEMU 00000001) ACPI: SSDT 000000000fff1edd 00037 (v01 QEMU QEMUSSDT 00000001 QEMU 00000001) ACPI: HPET 000000000fff1f90 00038 (v01 QEMU QEMUHPET 00000001 QEMU 00000001) (5 early reservations) ==> bootmem [0000000000 - 000fff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 0001327970] TEXT DATA BSS ==> [0001000000 - 0001327970] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [0001328000 - 000132803d] BRK ==> [0001328000 - 000132803d] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0000fff0 ACPI: PM-Timer IO Port: 0xb008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 Allocating PCI resources starting at 10000000 (gap: 10000000:effc0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64429 Kernel command line: root=/dev/hda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyS0 PID hash table entries: 1024 (order: 10, 8192 bytes) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Memory: 254112k/262080k available (1932k kernel code, 388k absent, 7244k reserved, 793k data, 244k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:288 Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 1728.861 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.72 BogoMIPS (lpj=6915444) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD QEMU Virtual CPU version 0.11.50 stepping 03 ACPI: Core revision 20090521 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 7 devices ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 496 io scheduler noop registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) piix 0000:00:01.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007 ide1: BM-DMA at 0xc008-0xc00f hda: QEMU HARDDISK, ATA DISK drive hda: MWDMA2 mode selected hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 24776 sectors (12 MB) w/256KiB Cache, CHS=24/255/63 hda: cache flushes supported hda: unknown partition table Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 244k freed e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Not using distcc. Type exit when done. /home # cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.11.50 stepping : 3 cpu MHz : 1728.861 cache size : 512 KB fpu : yes fpu_exception : yes cpuid level : 4 wp : yes flags : fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm pni hypervisor svm bogomips : 3457.72 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: /home #