No distccd in $PATH, acceleration disabled. Linux version 2.6.31.5 (landley@securitybreach) (gcc version 4.2.1) #1 Thu Nov 5 20:07:20 CST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) DMI 2.4 present. last_pfn = 0x7ff0 max_arch_pfn = 0x100000 init_memory_mapping: 0000000000000000-0000000007ff0000 0MB HIGHMEM available. 127MB LOWMEM available. mapped low ram: 0 - 07ff0000 low ram: 0 - 07ff0000 node 0 low ram: 00000000 - 07ff0000 node 0 bootmap 00001000 - 00002000 (6 early reservations) ==> bootmem [0000000000 - 0007ff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 000127616c] TEXT DATA BSS ==> [0001000000 - 000127616c] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #3 [0001277000 - 000127d03d] BRK ==> [0001277000 - 000127d03d] #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #5 [0000001000 - 0000002000] BOOTMAP ==> [0000001000 - 0000002000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00007ff0 HighMem 0x00007ff0 -> 0x00007ff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00007ff0 Allocating PCI resources starting at 8000000 (gap: 8000000:f7fc0000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32399 Kernel command line: root=/dev/hda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyS0 PID hash table entries: 512 (order: 9, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 126832k/131008k available (1618k kernel code, 3684k reserved, 486k data, 192k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe6000 - 0xfffff000 ( 100 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xc87f0000 - 0xff7fe000 ( 880 MB) lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB) .init : 0xc120f000 - 0xc123f000 ( 192 kB) .data : 0xc1194a04 - 0xc120e558 ( 486 kB) .text : 0xc1000000 - 0xc1194a04 (1618 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:16 Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: No reference (HPET/PMTIMER) available Marking TSC unstable due to could not calculate TSC khz Console: colour VGA+ 80x25 console [ttyS0] enabled Calibrating delay loop... 256.51 BogoMIPS (lpj=513024) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Intel Pentium III (Katmai) stepping 03 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=0 PCI: Using configuration type 1 for base access bio: create slab at 0 PCI: Probing PCI hardware pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000] NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 platform rtc_cmos: registered platform RTC device (no PNP device found) squashfs: version 4.0 (2009/01/31) Phillip Lougher msgmni has been set to 247 io scheduler noop registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:00:01.0: PIIX3: Enabling Passive Release pci 0000:00:01.0: Activating ISA DMA hang workarounds Real Time Clock Driver v1.12b Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) piix 0000:00:01.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007 ide1: BM-DMA at 0xc008-0xc00f hda: QEMU HARDDISK, ATA DISK drive hda: MWDMA2 mode selected hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive hdc: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 hda: max request size: 512KiB hda: 23096 sectors (11 MB) w/256KiB Cache, CHS=22/255/63 hda: cache flushes supported hda: unknown partition table Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:00:03.0: found PCI INT A -> IRQ 11 e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 52:54:00:12:34:56 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP cubic registered NET: Registered protocol family 17 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 VFS: Mounted root (squashfs filesystem) readonly on device 3:0. Freeing unused kernel memory: 192k freed e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX Not using distcc. Type exit when done. /home # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 0.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pse36 mmx fxsr sse hypervisor bogomips : 256.51 clflush size : 32 power management: /home #