No distccd in $PATH, acceleration disabled.
Uncompressing Linux......................................................................... done, booting the kernel.
Linux version 2.6.31.5 (landley@securitybreach) (gcc version 4.2.1) #1 Thu Nov 5 21:29:22 CST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
CPU: VIVT data cache, VIVT instruction cache
Machine: ARM-Versatile PB
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Kernel command line: root=/dev/sda rw init=/usr/sbin/init.sh panic=1 PATH=/usr/bin console=ttyAMA0
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127360KB available (2028K code, 265K data, 92K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:64
Console: colour dummy device 80x30
Calibrating delay loop... 369.45 BogoMIPS (lpj=1847296)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
dev:f1: ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
console [ttyAMA0] enabled
dev:f2: ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
dev:f3: ttyAMA2 at MMIO 0x101f3000 (irq = 14) is a AMBA/PL011
fpga:09: ttyAMA3 at MMIO 0x10009000 (irq = 38) is a AMBA/PL011
PCI core found (slot 11)
PCI: bus0: Fast back to back transfers disabled
PCI map irq: slot 0, pin 1, devslot 12, irq: 27
PCI map irq: slot 0, pin 1, devslot 13, irq: 27
bio: create slab <bio-0> at 0
SCSI subsystem initialized
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 249
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
loop: module loaded
PCI: enabling device 0000:00:0d.0 (0000 -> 0003)
sym0: <895a> rev 0x0 at pci 0000:00:0d.0 irq 27
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi 0:0:0:0: Direct-Access     QEMU     QEMU HARDDISK    0.11 PQ: 0 ANSI: 3
target0:0:0: tagged command queuing enabled, command queue depth 16.
target0:0:0: Beginning Domain Validation
target0:0:0: Domain Validation skipping write tests
target0:0:0: Ending Domain Validation
scsi 0:0:2:0: CD-ROM            QEMU     QEMU CD-ROM      0.11 PQ: 0 ANSI: 3
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
sd 0:0:0:0: [sda] 23192 512-byte logical blocks: (11.8 MB/11.3 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sr0: scsi3-mmc drive: 16x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sd 0:0:0:0: [sda] Attached SCSI disk
<6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
PCI: enabling device 0000:00:0c.0 (0005 -> 0007)
eth0: RTL-8139C+ at 0xc887c400, 52:54:00:12:34:56, IRQ 27
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
mice: PS/2 mouse device common for all mice
rtc-pl031 dev:e8: rtc core: registered pl031 as rtc0
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
rtc-pl031 dev:e8: setting system clock to 2009-11-07 07:32:06 UTC (1257579126)
VFS: Mounted root (squashfs filesystem) readonly on device 8:0.
Freeing init memory: 92K
eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
Not using distcc.
Type exit when done.
/home # cat /proc/cpuinfo
Processor	: ARM926EJ-S rev 5 (v5l)
BogoMIPS	: 369.45
Features	: swp half thumb fastmult vfp edsp java
CPU implementer	: 0x41
CPU architecture: 5TEJ
CPU variant	: 0x0
CPU part	: 0x926
CPU revision	: 5

Hardware	: ARM-Versatile PB
Revision	: 0000
Serial		: 0000000000000000
/home #