Linux version 3.10.0 (landley@driftwood) (gcc version 4.2.1) #1 Wed Jul 3 00:45:43 CDT 2013
Boot params:
... MOUNT_ROOT_RDONLY - 00000000
... RAMDISK_FLAGS - 00000000
... ORIG_ROOT_DEV - 00000000
... LOADER_TYPE - 00000000
... INITRD_START - 00000000
... INITRD_SIZE - 00000000
Booting machvec: RTS7751R2D
Node 0: start_pfn = 0xc000, low = 0x10000
Zone ranges:
Normal [mem 0x0c000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0c000000-0x0fffffff]
Renesas Technology Sales RTS7751R2D support.
FPGA version:1 (revision:0)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: root=/dev/sda rw init=/sbin/init.sh panic=1 PATH=/bin:/sbin console=ttySC1 noiotrap HOST=sh4
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Sorting __ex_table...
PVR=04050005 CVR=00110000 PRR=00000113
I-cache : n_ways=2 n_sets=64 way_incr=2048
I-cache : entry_mask=0x000007e0 alias_mask=0x00000000 n_aliases=0
D-cache : n_ways=2 n_sets=64 way_incr=2048
D-cache : entry_mask=0x000007e0 alias_mask=0x00000000 n_aliases=0
Memory: 62232k/65536k available (1941k kernel code, 395k data, 100k init)
virtual kernel memory layout:
fixmap : 0xdfff7000 - 0xdffff000 ( 32 kB)
vmalloc : 0xc0000000 - 0xdfff5000 ( 511 MB)
lowmem : 0x8c000000 - 0x90000000 ( 64 MB) (cached)
: 0xa0000000 - 0xc0000000 ( 512 MB) (uncached)
.init : 0x8c259000 - 0x8c272000 ( 100 kB)
.data : 0x8c1f56c0 - 0x8c2583e0 ( 395 kB)
.text : 0x8c010000 - 0x8c1f56c0 (1941 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:8 nr_irqs:8 0
intc: Registered controller 'sh7750' with 20 IRQs
intc: Registered controller 'sh7750_dma8' with 9 IRQs
intc: Registered controller 'sh7750_tmu34' with 2 IRQs
intc: Registered controller 'sh7750_pci' with 8 IRQs
Using R2D-PLUS interrupt controller.
intc: Registered controller 'r2d-plus' with 13 IRQs
sh_tmu.0: used for clock events
sh_tmu.0: used for periodic clock events
sh_tmu.1: used as clock source
Calibrating delay loop (skipped)... 120.00 BogoMIPS PRESET (lpj=240000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: SH7751R
devtmpfs: initialized
NET: Registered protocol family 16
PCI: Starting initialization.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
sh_tmu sh_tmu.0: kept as earlytimer
sh_tmu sh_tmu.1: kept as earlytimer
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000-0x3fffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:02.0: BAR 6: assigned [mem 0xfd000000-0xfd03ffff pref]
pci 0000:00:02.0: BAR 0: assigned [io 0x1000-0x10ff]
pci 0000:00:02.0: BAR 1: assigned [mem 0xfd040000-0xfd0400ff]
Switching to clocksource sh_tmu.1
sh_tmu sh_tmu.0: used for oneshot clock events
NET: Registered protocol family 2
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
9p: Installing v9fs 9p2000 file system support
msgmni has been set to 121
io scheduler noop registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
SuperH SCI(F) driver initialized
sh-sci.1: ttySC1 at MMIO 0xffe80000 (irq = 40) is a scif
console [ttySC1] enabled
loop: module loaded
sm501 sm501: SM501 At b3e00000: Version 050100a0, 8 Mb, IRQ 100
Attribute dbg_regs: write permission without 'store'
------------[ cut here ]------------
WARNING: at 8c140888 [verbose debug info unavailable]
CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0 #1
task: 8fc26000 ti: 8fc2c000 task.ti: 8fc2c000
PC : 8c140888 SP : 8fc2dea4 SR : 40008000 TEA : 00000000
R0 : 00000034 R1 : 00000000 R2 : 40008000 R3 : 00000000
R4 : 00000000 R5 : 8c273dd8 R6 : 00000002 R7 : 00001a78
R8 : 8c251b9c R9 : 8c247278 R10 : 8fd61180 R11 : 8c13fcf4
R12 : 8fd611fc R13 : 00000000 R14 : 00000000
MACH: 00000000 MACL: 00000054 GBR : 00000000 PR : 8c140888
Call trace:
[<8c148f54>] 0x8c148f54
[<8c0125e0>] 0x8c0125e0
[<8c142a86>] 0x8c142a86
[<8c0125e0>] 0x8c0125e0
[<8c142ddc>] 0x8c142ddc
[<8c141624>] 0x8c141624
[<8c141856>] 0x8c141856
[<8c142d98>] 0x8c142d98
[<8c142196>] 0x8c142196
[<8c1430ac>] 0x8c1430ac
[<8c263d20>] 0x8c263d20
[<8c263d2a>] 0x8c263d2a
[<8c263d20>] 0x8c263d20
[<8c25914c>] 0x8c25914c
[<8c2595b4>] 0x8c2595b4
[<8c2590c0>] 0x8c2590c0
[<8c1f0dae>] 0x8c1f0dae
[<8c0125e0>] 0x8c0125e0
[<8c03cccc>] 0x8c03cccc
[<8c0161e8>] 0x8c0161e8
[<8c03cccc>] 0x8c03cccc
[<8c1f0da4>] 0x8c1f0da4
---[ end trace 44f4e9c9cdcb1703 ]---
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
scsi0 : pata_platform
ata1: PATA max PIO0 mmio cmd 0xb4001000 ctl 0xb400080c irq 107
spi_sh_sci spi_sh_sci: master is unqueued, this is deprecated
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:02.0: enabling device (0000 -> 0003)
8139cp 0000:00:02.0 eth0: RTL-8139C+ at 0xfd040000, 52:54:00:12:34:56, IRQ 112
rtc-r9701 spi0.0: cannot read RTC register
TCP: cubic registered
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
ata1.00: ATA-7: QEMU HARDDISK, 1.4.93, max UDMA/100
ata1.00: 60224 sectors, multi 16: LBA48
ata1.00: configured for PIO
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 1.4. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 60224 512-byte logical blocks: (30.8 MB/29.4 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
VFS: Mounted root (squashfs filesystem) readonly on device 8:0.
Freeing unused kernel memory: 100K (8c259000 - 8c272000)
8139cp 0000:00:02.0 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
Not using distcc.
Type exit when done.
(sh4:1) /home # cat /proc/cpuinfo
machine : RTS7751R2D
processor : 0
cpu family : sh4
cpu type : SH7751R
cut : unknown
cpu flags : fpu ptea
cache type : split (harvard)
icache size : 4KiB (2-way)
dcache size : 4KiB (2-way)
address sizes : 29 bits physical
bogomips : 120.00
(sh4:1) /home # exit
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.